3-in-1 Soil Monitor for Gardening and Plant Care - Meter with Attachable Hanger, No Battery Needed

Product Description

3-in-1 comprehensive soil monitor for all gardeners and all kinds of gardening! Allows you to measure the 3 metrics most important for taking care of your beloved plants and flowers: moisture/humidity, pH levels and fertility - and displays them nicely on an easy-to-read, clear digital dial. Convenient to use with no battery needed and double needle probes for convenient soil penetration. Attachable hanger makes the lightweight device easy to store anywhere when not in use - can be picked up when needed to use, and hung back easily once done. Happy gardening!

Instructions on How to Use:

1. Decide which of the three available metrics you want to use (moisture/pH/fertility) and select it using the toggle switch.
2. Insert the probes at the bottom of the device into the soil you wish to measure.
3. Wait approximately 10 minutes for the reading to finish - check the measurement at this time.
4. Once done, remove the probes from the soil and wipe them cleanly after using. Stick hanger to back of meter for easy storage.

Please Be Aware of the Following:

• Do not use the device to test liquids, including pure water. It can only be used to test soil.
• Do not force the probes into very hard or rough soil, or make contact with hard or sharp objects, as this would easily damage the probes.
• If the soil is too dry, the meter may not produce a reading. Therefore, make sure to water the soil before testing.
• Do not leave the meter in the soil for long periods of time.
• When hanging the device after use, make sure that the hanger has an adequate grip on the object being hung from and that the object is sturd. Dropping the device onto a hard surface can damage it, especially the probes.
• Again, please make sure to wipe and clean the probes after each use to ensure effective future readings.